PDA

View Full Version : lift strap replacement



MOY
01-22-2008, 02:00 AM
HI !!!. I begin the restoration of my E-15HA. I begin by the front lift. The last owner change the front lift strap, by one homemade built with a car safety seat belt 1 13/16 large. I have some literature, i see the original one is 1 inch large x ????. Some one could tell me the proper lengh beatwin the loops.

MERCI À L'AVANCE!!!!! YVES (MOY)

FarmallMan
01-22-2008, 10:10 AM
I have a new one that I will measure when I get home this evening. You can make your own from nylon webbing, or you can buy them premade. Keith Stieg and Harold Zimmerman (Clean Power) both sell them. You can find their phone numbers in the Commerical Vendors section of the forum.

Nick :cool:

MOY
01-23-2008, 11:25 PM
Tank You!!!! Farmallman For The Info. Of Part Retailler .but I Could Built My Self, I Need Only The Info. About The Original One.

Bien à Vous! Moy

FarmallMan
01-23-2008, 11:39 PM
I measured it and it measures 1.00 meters. The webbing itself is 1 inch wide. The ends are looped back a total of 10 cm and are sewn in place. Both ends are done this way. Hope this helps. Write back if my explanation is confusing.

Nick :cool:

MOY
01-24-2008, 11:48 PM
All Your Info. Is Find Sir Farmallman, Now I'm Ready To Built My Belt .
Tank You!!

Sincèrement Votre. Moy :d

FarmallMan
01-25-2008, 01:03 AM
Pleased to help.

Nick :cool: