The cog drive part #s are as follows. (warning - they're not cheap)
They will provide a .75 to 1 drive ratio
Dodge TL24H100 1610 Timing Belt Pulley
Dodge 1610x7/8KW Bushing
Dodge TL32H100 2517 Timing Belt Pulley
Dodge 2517x3/4KW Taperlock Bushing
Goodyear 330H100 Drive Belt
Applied Industrial Technologies
Jackson MI Branch
Thread: Sychronous belt conversion
Results 41 to 43 of 43
06-18-2013, 09:17 AM
- Join Date
- Mar 2010
- camden mi
Last edited by dcforever; 06-18-2013 at 09:22 AM.
09-17-2013, 04:22 PM
This was a great upgrade for me. Can mow in D1 at fast enough speed now. Previously family members through this E-15 was too slow to use to cut grass.
D2 is too fast for a smooth cut. Thanks for posting pictures and part numbers.
One minor problem, I seem to have some noise from the smaller pulley/bushing on the motor. It goes away with use. if I turn by hand it I can here it sometimes, not always. I thought the smaller pulley was loose, but it is not.
09-18-2013, 06:50 PM
My synchronous belt sometimes sounds like rubbing two balloons together. Kinda squeaky. Seems worse on cold days but its always present. You might check to make sure the bushing has tightened down "square" on the pulley.
|« Previous Thread | Next Thread »|