Notices
 
Results 1 to 6 of 6
  1. Curtis Cab Measurements 
    #1
    Junior Member autumntrain07's Avatar
    Join Date
    Jul 2007
    Location
    Northwest Iowa
    Posts
    5
    Does anyone happen to have the (rough) measurements of the Curtis cabs used on the Elec Trak? I have a line (eBay) on a Curtis cab that looks identical in configuration to those used on the Elec Trak but appears to be somewhat larger, i.e. longer roof line. I am thinking that if the cab front is of the correct size, the top could be modified. From what I understand these are pretty tough items to come by so this might be worth the effort.

    Chris W.

    Northwest Iowa
    "Lead, follow or get out of the way!"
     
     

  2. Re: Curtis Cab Measurements 
    #2
    Senior Member
    Join Date
    Feb 2007
    Location
    meadowbrook, pa
    Posts
    114
    Hi,
    Welcome to the owners' club. I don't have the measurements, but if you look in the Gallery, under Roberttroll, he has a good picture of a cab that he restored. There may be others, as well.
    robmax
     
     

  3. Re: Curtis Cab Measurements 
    #3
    Senior Member Steve Duke's Avatar
    Join Date
    Oct 2004
    Location
    Burlington, Massachusetts
    Posts
    203
    Here you go:

    front panel w/ glass - 17-1/4 " at bottom as it sits on the top of the dash. Inside lip is 4-1/2 "

    front panel height is 32-7/8 "

    front panel top width is 26-1/2 "

    roof panel is 44-3/4 " X 27 " ( plus 1/2" each side for drip edge )

    rear supports are 42" tall X 4-1/2 " X 3-1/2"

    base mount for rear supports is 4-1/2" X. 5-1/2"


    hope that gives you what you need....
     
     

  4. Re: Curtis Cab Measurements 
    #4
    Junior Member autumntrain07's Avatar
    Join Date
    Jul 2007
    Location
    Northwest Iowa
    Posts
    5
    Thank you so much! What a great source of information this club continues to be! I am looking forwrd to the time when I can meet some of the GREAT members face to face!

    Chris W.
    Northwest Iowa
    "Lead, follow or get out of the way!"
     
     

  5. Re: Curtis Cab Measurements 
    #5
    Senior Member Steve Duke's Avatar
    Join Date
    Oct 2004
    Location
    Burlington, Massachusetts
    Posts
    203
    You're welcome ! That's what we're all about here....helping each other with our hobby / passion / obsession / whatever applies

    Steve D.
     
     

  6. Re: Curtis Cab Measurements 
    #6
    Junior Member
    Join Date
    Feb 2015
    Location
    France
    Posts
    1
    I don't really see a way to PM you with this forum software that i'm familiar with, but the parts are in, it was $12.62 for the bearings and races sets, $.56 more if you want a pair of the square orings to help seal them from outside dirt. Shipping to Norway is $10 for 1st class and $26 for pri mail. Email me direct at game.tech.us att gmail dott com.
    c



    eman
     
     

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •