Does anyone happen to have the (rough) measurements of the Curtis cabs used on the Elec Trak? I have a line (eBay) on a Curtis cab that looks identical in configuration to those used on the Elec Trak but appears to be somewhat larger, i.e. longer roof line. I am thinking that if the cab front is of the correct size, the top could be modified. From what I understand these are pretty tough items to come by so this might be worth the effort.
Thread: Curtis Cab Measurements
Results 1 to 6 of 6
12-30-2014, 09:04 PM"Lead, follow or get out of the way!"
01-02-2015, 11:18 AM
Here you go:
front panel w/ glass - 17-1/4 " at bottom as it sits on the top of the dash. Inside lip is 4-1/2 "
front panel height is 32-7/8 "
front panel top width is 26-1/2 "
roof panel is 44-3/4 " X 27 " ( plus 1/2" each side for drip edge )
rear supports are 42" tall X 4-1/2 " X 3-1/2"
base mount for rear supports is 4-1/2" X. 5-1/2"
hope that gives you what you need....
01-04-2015, 07:00 PM
Thank you so much! What a great source of information this club continues to be! I am looking forwrd to the time when I can meet some of the GREAT members face to face!
Northwest Iowa"Lead, follow or get out of the way!"
02-21-2015, 06:35 AMI don't really see a way to PM you with this forum software that i'm familiar with, but the parts are in, it was $12.62 for the bearings and races sets, $.56 more if you want a pair of the square orings to help seal them from outside dirt. Shipping to Norway is $10 for 1st class and $26 for pri mail. Email me direct at game.tech.us att gmail dott com.c
- Join Date
- Feb 2015
|« Previous Thread | Next Thread »|