Now that the tractor is running well, albeit with a slight transaxle leak, I have decided to test run all of my attachments. I immediately ran into a snag with my rear lift. I plugged it into the tractor connection and operated the lift in both directions. The connectors point, between the tractor and lift got warm, so I shut things down. cleaned up the connectors, tried again and got nothing. Is there a manual for the rear lift, other than the three page owners manual (in the manual section) that can guide me through some troubleshooting? I'm getting 19 VDC at the tractor side of the connector, so I am assuming I have a lift/lift motor problem.

Many thanks,

Ed